|
Single door access controller or additional RF reader for IN/OUT application 9,999 card holders. Independent 4 relays for 4 inputs and 4 outputs(optional). Operation modes-RF only, RF + door code, RF/door code, free access. Reading range from 5 to 15 cm. |
|
|
|
|
|
Card holders |
3,000~9,999 cards |
Card holders |
3,000~9,999 cards |
Type |
: Surface mount, water proof |
Monitor inputs |
: Door contact, Exit push button, case tamper |
Operation temperature |
: 0°C~50°C |
Humidity |
: 20%~90% RH, Non condensation |
Power supply |
: 12 V DC |
Keypad |
: With brief 3 X 4 membrane keypad for system programming and password entry |
Interface |
: RS-485 or Wiegand output or TTL(optional) |
Dimensions |
: 120(L) x 83(W) x 30(H) mm |
Weight |
: 450g ± 5% |
Frequency of Operation |
: ASK 125KHz |
Baud rate |
: 4,800 bps, N.8.1 (optional for 300~19,200bps) |
|
* Access control system with integral Proximity/RF/reader into one unit.
* Easy to install, low and designed for indoor or outdoor use .
* Proximity reader to send out Wiegand.
* With tamper switch and two loop sensor inputs to trigger alarm as case is tampered or loop is intruded.
* Programmable door release & monitoring time, error trials, alarm time.
* Reading range from 5 to 15 cm.
* Non-volatile EEPROM to store system parameters for 10 years.
* Allow 3,000 cards capacity based and expand 9,999 cards capacity for Access control function.
* The Pegasus proximity readers are reading EM chip Pegasus PG-PROXC-DVP/44, PG-PROX-
DVX/44 proximity card and PG-PROXKEY-D/44 proximity keyfob ... etc.
* LED indicator to show the operation status.
* With CPU watch-dog function to prevent malfunction. |
|
|
|
|
