| |
|
GPW100 Proximity Tag Encoder interfaces to any PC with an RS-232 serial port, high performance and high reliability.
The Encoder comes with an utility software that enables you to encode the ID code into the proximity tag easily at your side.
Due to GPW100, it becomes possible for you to program the proximity tag with the ID code you want.
|
| |
|
|
Frequency |
125KHz, ASK |
|
Format |
64 bits, Manchester coding |
|
Interface |
RS-232 9600, no parity, 8 data bits, 1 stop bit |
|
Tag |
GiTAG1 (the only suitable tag for GPW100)
> Chip type: GI 8693 Read/Write
> ID Code: 10 digits in Hex
> 125KHz, ASK, 64 bits, Manchester coding
> Rate timing: MOD 64 (64 clocks per bit)
> Compatibility: EM H4002 (after programmed)
> Passive, no battery required |
|
ID number |
10 digits in Hex or 13 digits in Decimal
Wiegand number format: option |
|
Operating temperature |
0 ~ 50°C |
|
Storage temperature |
-10 ~ 55°C |
|
Humidity |
10 ~ 90% relative |
|
Dimensions |
86 (W) x 120 (L) x 80 (H) mm |
|
Power requirement |
DC 9V, 500mA |
|
* Encoded tags by GPW100 can be read by all GP Series readers or any other GP compatible readers
* RS-232 interface, 9600, N, 8, 1
* Utility software features:
> Read a Card
> Write a Card
> Write cards from a file
> Edit / Write a Card
> Write Cards with progressive numbers
> Duplicate a Card
|
|
|
|
