The 510 Programmable Data Terminal works not only as a Time and Attendance terminal,but also as a work-in-process (WIP) system. The 510 is perfect of improving normal work procedure,data accuracy,and operations accountablity because of its ability to track job locations and record errors and delays in the manual work tracking process.
Data Terminal can be used in work stations, office departments, or as a point-of-sale device. With networking capabilities of up to 32 stations (99 stations with repeater),the Programmable Data Terminal can offer total accountability for your entire organization. The 510 is also easily implemented and easily modified because it is C language programmable with up to 128K of flash memory and a 16 bit CMOS CPU processor. There is no need to worry about power failure. With a 8.4V NiCd battery,you will have six hours of worry free operation after main power failure.
|
Electrical |
Voltage
Power consumption
|
12V+-5% DC
: 200mA maximum with LCD backlight off and no external devices attached |
Environment |
Humidity(operating)
Humidity(storage)
Temperature(operating)
Temperature(storage)
|
: non-condensed 20% to 90%
: non-condensed 10% to 95 %
: 0 to 50 degree celsius
: -20 to 70 degree celsius |
Indicator |
Buzzer
Power LED
Good Read LED
Battery Low LED
Function LEDs
LCD display
|
4 volumes selectable
: Red
: Green
: Yellow
: Red x 4
: 20 x 2 characters LCD display with tunable LED backlight and adjustable viewing angle |
Input Devices |
Slot type reader
External reader
Membrane keypad
External keyboard
|
: 5100 for barcode slot or magnetic
: 5101 for contact less reader, 125 KHz
: Barcode, Wand or TTL Laser Scanner
: standard 4 by 4 membrane keypad, expandable up to 8x8 :
: PC/AT compatible keyboard can be attached for data entry |
Physical |
Dimension
Weight
Material
Color
|
: 261x125x100mm
: 1 Kg including all
: ABS
: Gray |
Memory |
Program memory
Data memory
|
: 128 KB flash memory
:128KB to 512KB SRAM on an 128KB base,With 3.6V Nicd rechargable battery backup |
Digital Input/ Output |
Digital input
Digital Output
Alarm Table
Shift Table
|
: 2 photo-isolated digital inputs can be used to monitor external devices.
: 2 photo-isolated digital outputs can be used to control external devices such as alarm,door lock and so no.
: Set delay output 01 to 16 timetable
: Automatic shift change 01 to 16 timetable |
Quality Approved |
EMC Regulation
|
: FCC/CE Approved |
Calendar |
Battery backed calendar chip capable of 1 ppm fine tune. |
Setup Program |
Intelligent download for WINDOWS |
Communication |
RS-485
RS-232
|
: multi-drop communication at 75 kbps,up to 32 stations can be connected together without repeaters. with repeaters,up to 99 stations.
: 2 RS-232 port are equipped for host computer communication and / or external connection such as printer. |
